The Cartridge Status column of the Summary for Slots screen is particularly useful with echo copy
because the backup application is not aware of any copy failures. The status of the physical
cartridges in the destination library will be one of the following:
DescriptionPool typeStatus message
This cartridge is not part of any pool.NoneUnmanaged
Copying the header from the target cartridge to this newly created
source cartridge. If the barcode of the target cartridge exists anywhere
on the VLS, it is moved into the source library for the copy pool.
Echo CopyAdding Cartridge
The target and source cartridges have the same contents.Echo CopyUp To Date
Waiting for the backup application to update the source cartridge by
appending or overwriting the cartridge over the SAN. A cartridge will
Echo CopyWaiting for Backup Data*
get into this state when the barcode for the source cartridge already
existed on the source VLS when the (LBR) Echo Copy pool was created
and the source cartridge contained data. It is not possible to replicate
that preexisting content in a deduplicated manner.
The cartridge has been loaded into a drive by the backup application.Echo CopyIn Use
Creating deduplication instructions.Echo CopyBackup Postprocessing*
The source virtual cartridge has been updated by the backup
application since the target cartridge was updated. Instruction creation
is complete.
Echo CopyOut of Sync
Waiting to acquire resources to run the job to synchronize the target
cartridge with the source cartridge.
Echo CopyMirror Scheduled
Mirroring from the target cartridge to the source cartridge.Echo CopyMirroring
A problem was encountered mirroring the cartridge.Echo CopyMirror Broken
Mirroring from the source cartridge to the target cartridge.Echo CopyRestoring
Ejecting the target cartridge and about to put the source cartridge into
the firesafe.
Echo CopyEject Pending
About to eject the target cartridge and then put the source cartridge
into the firesafe.
Echo CopyMirror/Eject Pending
Synchronizing the cartridge in the Destination Library with the source
virtual cartridge. When the mirror job is complete, the target cartridge
will be ejected and the source cartridge will be moved to the firesafe.
Echo CopyMirroring before Eject
Gathering deduplication instructions needed for replication using tape
transport.
Echo CopyExport Preprocessing*
Copying content from the source cartridge onto a physical tape.Echo CopyExporting*
Copying content from the source cartridge will continue on another
physical tape.
Echo CopyPartially Exported*
Waiting for the remaining cartridges in the pool to finish exporting.Echo CopyExport In Use*
Importing status on the destination library, In Sync status on the source
VLS.
Echo CopyIn Transit/Importing*
Importing status on the destination library, loaded into a drive by the
backup application the source VLS.
Echo CopyImporting/In Use*
Importing status on the destination library, creating deduplication
instructions on the source VLS.
Echo CopyImporting/Backup
Postprocessing*
Importing status on the destination library, Out Of Sync status on the
source VLS.
Echo CopyImporting/Out of Sync*
Gathering the deduplication instructions needed for replication.Echo CopyMirror Preprocessing*
52 Automigration/Replication
To Next Page
Loading...
