HP 14 User Manual

4. Remove the battery (see Battery on page 43).
5. Disconnect the WLAN module antenna cables from the WLAN module (see
WLAN module on page 52).
6. Remove the following components:
●
Service door (see
Service door on page 49)
●
Top cover (see
Top cover/keyboard on page 55)
To remove the display assembly:
1. Disengage the adhesive and disconnect the display panel cable (1) from the system board.
2. Remove the display panel cable from its routing path (2).
3. Release the wireless antenna cables from the clips (3) built into the base enclosure.
CAUTION: Support the display assembly when removing the following screws. Failure to support the
display assembly can result in damage to the display assembly and other computer components.
4. Remove the five Phillips PM2.5×5.0 screws (1) that secure the display assembly to the computer.
62 Chapter 4 Removal and replacement procedures

HP 14 Specifications

General

Type	Original
Ink type	Pigment-based ink
Compatibility	-
Printing colors	Black
Print technology	Inkjet printing
Quantity per pack	1 pc(s)
Cartridge capacity	High (XL) Yield
Storage temperature (T-T)	0 - 60 °C
Operating temperature (T-T)	15 - 35 °C

Weight and Dimensions

Package type	Box
Package weight	58.9 g