SPECIFICATIONS
r
FREQUENCY RANGE:
0.008 to 1200 cps in five decade ranges with wide overlap at each
dial extreme.
DIAL ACCURACY:
Within
*2% from "1. 2" to "121q on dial; *3% from ". 8" to "1.2".
FREQUENCY STABILITY:
Within
4%
including warm-up drift and line voltage variations of
*lo%.
OUTPUT WAVEFORMS: Sinusoidal, square, and triangular. Selected by panel switch.
MAXIMUM OUTPUT VOLTAGE:
At least 30 volts peak-to-peak across rated load (4000 ohms) for
all
three waveforms. (10.6 volts RMS for sinewave.
)
FREQUENCY RESPONSE:
Constant within
*0.2 db over entire frequency range at rated output
and load.
lNTE RNAL IMPEDANCE
:
Approximately 40 ohms over the entire range.
DISTORTION:
Less than 1% on
all
ranges except X100. Less than 2% rms on
X100.
OUTPUT SYSTEM:
Can
be
operated either balanced or single-ended. Output system
is
direct-coupled; dc level of output voltage remains stable over
long periods of time. DC adjustment available on front panel.
HUM LEVEL:
Less than
0.05%
at
rated output.
SYNC PULSE
:
10 volts peak negative, less than
5
microseconds duration. Sync
pulse occurs at crest of
sinewave and with corresponding positions
on other waveforms.
POWER: Operates from
ll51230V
-+lo%,
5011000 cycles source. Requires
17 5 watts.
DINENSIONS: Cabinet Mount: 20-314" wide, 12-112" high, 14-112" deep.
Rack Mount:
19" wide,
10-l/21qhigh, 14-11 4" deep.
WEIGHT: Cabinet Mount: 48 lbs; shipping weight, approximately 84 lbs.
Rack Mount:
36 lbs; shipping weight, approximately 74 lbs.
ACCESSORIES AVAILABLE:
For rack mount style: End Frames with handles for bench use.
Specify
@No. 17 End Frames.
To Next Page
Loading...
