HP 212A - Page 47

SECTION V
TABLE OF REPLACEABLE PARTS
NOTE
Readily available standard-components have been used
in this instrument, whenever possible. However, special
components may be obtained from your local
Hewlett-
Packard representative or from the factory.
When ordering parts always include:
1. @ Stock Number.
2. Complete description of part including cir-
cuit reference.
3. Model number and serial number of in-
strument.
4. If part is not listed give complete descrip-
tion, function, and location of part.
If there are any corrections for the Table of Replaceable
Parts they will be listed on an Instruction Manual Change
sheet at the front of this manual.