Table 5-17 Display assembly part descriptions and part numbers (continued)
Description Spare part number
Antennas
Dual L24640-001
Single L29012-001
Display enclosure
Dark ash silver M23372-001
Asteroid silver M42491-001
Before removing the display assembly, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 26).
2. Remove the rubber feet (see Computer feet on page 26).
3. Remove the bottom cover (see Bottom cover on page 27).
4. Remove the battery (see Battery on page 28).
To remove the display assembly:
1. Disconnect the display cable from the system board (1).
2. Disconnect the wireless antenna cables from the WLAN module (2).
3. Position the computer so it is open with the display hanging o the table (1).
4. Remove the six Phillips M2.5 × 6.0 screws (2) from the display hinges.
Component replacement procedures 49
To Next Page
Loading...
