HP 2530-48G User Manual

A-8
Specifications
Mode Conditioning Patch Cord
Figure A-1. Example: Connecting a Mode Conditioning Patch Cord for Gigabit-LX
Make sure you purchase a patch cord that has appropriate connectors on each
end, and has multimode fibers that match the characteristics of the multimode
fiber in your network. Most important, the core diameter of the multimode
patch cord must match the core diameter of the multimode cable
infrastructure (either 50 or 62.5 microns).
Tx
Rx
To network
multimode
cabling
Mode Conditioning
Patch Cord
The multimode cable in the patch cord
must match the characteristics of your
network cable
Gigabit-LX port
Single mode section plugs into Tx
port on Gigabit-LX Transceiver or
Gigabit-LX SFP

HP 2530-48G Specifications

General

Switching Capacity	104 Gbps
Throughput	77.3 Mpps
Power Supply	Internal
MAC Address Table Size	16, 000 entries
Jumbo Frame Support	Yes
Mounting	Rack-mountable
SFP Ports	4
Management	Web, CLI, SNMP
Layer	Layer 2
Power Consumption	44 W (maximum)
Features	VLAN
Operating Temperature	0°C to 45°C (32°F to 113°F)
Operating Humidity	15% to 95% non-condensing
Ports	48 RJ-45 autosensing 10/100/1000 ports