HP 2530 - Page 100

Example 44 Listing an IPv6 ACL
HP Switch(config)# show access-list Accounting
Access Control Lists
Name: Accounting
Type: ipv6
Applied: Yes
1
SEQ Entry
--------------------------------------------------------
10 Action: permit
Remark: Telnet Allowed
2
3
Src IP: 2001:db8:0:1af::10:14
4
Prefix Len: 128
5
Dst IP: ::
6
Prefix Len: 0
7
Src Port(s):
8
Dst Port(s): eq 23
9
Proto : TCP Option(s):
10
Dscp : -
20 Action: permit
Src IP: 2001:db8:0:1af::10:23 Prefix Len: 128
Dst IP: :: Prefix Len: 0
Src Port(s): Dst Port(s): eq 23
Proto : TCP Option(s):
Dscp : -
30 Action: deny (log)
Src IP: 2001:db8:0:1af::10 Prefix Len: 116
Dst IP: :: Prefix Len: 0
Src Port(s): Dst Port(s):
Proto : TCP Option(s):
Dscp : -
40 Action: permit
Src IP: 2001:db8:0:1af::10 Prefix Len: 116
Dst IP: :: Prefix Len: 0
Src Port(s): Dst Port(s):
Proto : IPV6
Dscp : -
91
Protocol DataIndicates whether the
ACL is applied to an
interface.
10
DSCP Codepoint or
Precedence
2
Remark Field
(Appears if remark
configured.)
8
TCP Destination Port
NOTE: An empty
TCP field indicates that
the TCP port number
for that field can be
any value.
3
Source Address
5
Destination Address
7
TCP Source Port
4
6
Source and Destination
Prefix Lengths
100 Updates for the HP Switch Software IPv6 Configuration Guide