EasyManuals Logo

HP 2530 User Manual

HP 2530
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
Displays, for a MAC authenticated client (MAC-Auth), the status of
RADIUS-assignment details for that client.
web-based clients [port-list] detail
Displays, for a Web authenticated client (web-based authentication), the status of
RADIUS-assignment details for that client.
For example, suppose port 4 has been statically configured from the CLI with the following:
802.1p priority: 7
Inbound rate-limit: 50 percent
Outbound rate-limit: 50 percent
The above, statically configured, per-port priority and inbound rate-limit settings will not apply to
any clients who authenticate and receive different inbound priority and rate-limit settings from the
RADIUS server. If the RADIUS server also assigns an outbound rate-limit setting, which is applied
per-port instead of per-client, then the outbound traffic from the port to all connected clients will be
rate-limited according to the value set by the server for the most recently authenticated client. Thus,
if client "X" authenticates with web-based authentication on port 4 with a RADIUS server that
assigns a priority of 3, an inbound rate-limit of 10,000 kbps, and an outbound rate-limit of 50,000
kbps, then:
The inbound traffic from client "X" will be subject to a priority of 3 and an inbound rate-limit
of 10,000 kbps. Traffic from other clients using the port will not be affected by these values.
The combined rate-limit outbound for all clients using the port will be 50,000 kbps until either
all client sessions end or another client authenticates and receives a different outbound rate-limit.
34 Updates for the HP Switch Software Access Security Guide

Table of Contents

Other manuals for HP 2530

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 2530 and is the answer not in the manual?

HP 2530 Specifications

General IconGeneral
LayerLayer 2
Operating Temperature32°F to 113°F (0°C to 45°C)
ModelHP 2530
Power over Ethernet (PoE)PoE+
ManagementWeb interface, CLI, SNMP
Memory128 MB flash
Input Voltage100-240 VAC
Jumbo Frame SupportYes
Operating Humidity15% to 95% non-condensing

Related product manuals