Syntax:
show ip igmp groups
Shows VLAN-ID, uptime, expiration time, multicast filter type.
Output:
IGMP Group Address Information
VLAN ID Group Address Expires UpTime Last Reporter | Type
------- ------------- --------- -------- --------------- + -----
Syntax:
show ip igmp config
Shows IGMP configuration information.
Output:
IGMP Service Config
Control unknown multicast [Yes] : Yes
Forced fast leave timeout [0] : 4
Delayed flush timeout [0] : 0
VLAN ID VLAN Name IGMP Enabled Querier Allowed Querier Interval
------- ------------ ------------ --------------- ----------------
1 DEFAULT_VLAN No Yes 125
Syntax:
show ip igmp statistics
Shows IGMP statistical information.
Output:
Total VLANs with IGMP enabled : 0
Current count of multicast groups joined : 0
IGMP Joined Groups Statistics
VLAN ID VLAN Name Total Filtered Standard Static
------- -------------------------------- ------ -------- -------- ------
1 DEFAULT_VLAN 0 0 0 0
Syntax:
show ip igmp vlan <ID>
Usage:
show ip igmp [config|group IP-ADDR|groups vlan
<VLAN-ID>|statistics|VLAN-
Invoked without any parameters, shows per-VLAN IGMP status, or, if VLANs are
disabled displays the global IGMP status.
When followed by the config keyword, shows IGMP global configuration
information.
When followed by statistics keyword shows igmp statistical information.
VLAN-ID can be used to get operational, statistical, and configuration information
for a particular VLAN (if VLAN support is enabled).
Help function commands 33
To Next Page
Loading...
Need help?
General