If you want
to
provide for more swap space now, find your case below
and
take
the
corresponding action; however, remember
that
it
is
difficult to decrease
the
amount
of
swap space if you set it
up
in this way:
AXE
System
Typical
Workstation
For a
standalone
AXE
system on which you plan
to
run a
few
applications,
the
default value is adequate.
Enter
0.
For a workstation on which you plan
to
run, for exaInple,
the
XII
Window System
and
subsystems such as
The
SoftPC,
networking,
and
BASIC-UX,
the
default value
is
adequate.
Enter
0.
If you plan
to
run
large, complex applications, examine
the
documentation
for
the
applications,
and
enter
a swap space
value
that
will
accommodate
the
applications.
Cluster
Server A cluster server needs a disk
that
provides approximately
300 Mbytes of file system space. And, depending on
the
applications you decide
to
run, you could need
20
Mbytes
(40,000 512-byte blocks)
of
swap space for each cnode
installed on
the
system
(the
XII
Window System, for
example, needs
this
much swap space). Remember
that
as
you increase swap space, you decrease file system space.
Entering
0 moves you
to
Step
8;
entering @ gives you
another
chance
to
specify
the
swap space.
Installing the HP-UX Operating System 2-13
To Next Page
Loading...
