HP 318 - Installing the Software on a Windows Computer; Connecting the Camera to a Windows Computer

Sharing and printing images 31
Installing the software on a Windows
computer
1 Insert the HP photosmart 318 CD into your computer’s CD-
ROM drive. The installation window automatically appears.
If the installation window does not appear, use Windows
Explorer or My Computer to locate your CD-ROM drive, and
then double-click the file Setup.exe.
2 Click Next, and then follow the instructions on the screen to
install the software.
The software places several icons on your desktop, including a
link to the photo imaging Quick Reference.
To install the bonus software
Certain versions of the camera are shipped with bonus software.
1 Press and hold the SHIFT key on your computer keyboard
while you insert the HP photosmart 318 CD into your
computer’s CD-ROM drive.
If the automatic installation starts, click Cancel.
2 Click Start, click Run, and in the Open box, type
X :\Bonus\setup.exe (where X is the drive letter assigned to
your CD-ROM drive).
3 Click OK, and then follow the instructions on the screen to
install the software.
Connecting the camera to a Windows
computer
Before connecting the camera to your computer, make sure you
have installed the software.
Note The camera uses a USB connection, so you do not
need to turn the computer off when connecting or
disconnecting the camera.
SJUG.book Page 31 Tuesday, October 9, 2001 1:35 PM