HP photosmart 318 User Guide34
To use a memory card reader
1 Make sure the camera is turned off.
2 Remove the memory card from the camera.
3 Insert the memory card into the memory card slot in the
memory card reader.
4 Turn the computer on if you haven’t already.
5 Double-click the HP Photo Imaging Software icon on the
Windows desktop. The main window of the HP Photo Imaging
Software opens.
6 Click Unload Images in the main window. Because no USB
camera is found, the software displays a dialog box in which
you can select the drive letter for your memory card reader.
7 Select the drive letter (such as H:) for your memory card
reader in the dialog box.
8 Start the HP Automatic Image Unload software and complete
the steps to unload without the timer.
SJUG.book Page 34 Tuesday, October 9, 2001 1:35 PM
To Next Page
Loading...
