HEWLETT
PACKARD
SAFETY
SUMMARY
Tho following
ganorol
ufoty pneoutionr murt
bo
oburvod during
all
phrm of oporotior,
urviw,
and nprir
of
thir
inrtrumont friluro
to
comply
with
thaw
procautions
or
with rprcific
warnings
oluwhon
in
thir
manual
violotw
rrfoty rtandrrdr of dosign, mrnufrcturo, and intondod
uu
of tho inrtrumont Howlott-PieLord Company
assume8
no
liability for tho curtomar'r foiluro
to
comply
with thou roquinmont8.
This
is
I
Srfoty
Class
1
inrtrumont
GROUND
THE
INSTRUMENT
To minimize shock hazard, the instrument chassis and cabinet must be connected to an elec-
trical ground. The instrument is equipped with a three-conductor ac power cable. The power
cable must either be plugged into an approved three-contact electrical outlet
or
used with a
three-contact to two-contact adapter with the grounding wire (green) firmly connected to an
electrical ground (safety ground) at the power outlet. The power jack and mating
plug
of the
power cable meet International Electrotechnical Commission (IEC) safety standards.
DO
NOT
OPERATE
IN
AN
EXPLOSIVE
ATMOSPHERE
Do
not operate the instrument
in
the presence of flammable gases
or
fumes. Operation of any
electrical instrument
in
such an environment constitutes a definite safety hazard.
KEEP
AWAY
FROM
LIVE
CIRCUITS
Operating personnel must not remove instrument covers. Component replacement and internal
adjustments must be made by qualified maintenance personnel.
Do
not replace components
with power cable connected. Under certain conditions, dangerous voltages may exist even with
the power cable removed. To avoid injuries, always disconnect power and discharge circuits
before touching them.
DO
NOT
SERVICE
OR
ADJUST
ALONE
Do
not attempt internal service
or
adjustment unless another person, capable of rendering first
aid
and resuscitation, is present.
DO
NOT
SUBSTITUTE
PARTS
OR
MODIFY INSTRUMENT
Because of the danger of introducing additional hazards, do not install substitute parts
or
per-
form any unauthorized modification to the instrument. Return the instrument to a Hewlett-
Packard Sales
and
Service Office for service and repair to ensure that safety features are main-
tained.
DANGEROUS
PROCEDURE
WARNINGS
Warnings, such as the example below, precede potentially dangerous procedures throughout
this manual. Instructions containe#
in
the warnings must be followed.
WARNING
I
Dongarour
voltagu,
wprbla of wuring drth,
on
prwont
in
thir inrtrumont Uso
ox.
tnmo
wution whon handling, twting,
and
rdjurting.
A
To Next Page
Loading...
Need help?
General
