To Next Page

To Previous Page

13-38

Configuring Port-Based and User-Based Access Control (802.1X)

802.1X Open VLAN Mode

Open VLAN Mode with Only an Authorized-Client VLAN Configured:

• Port automatically blocks a client that cannot initiate an

authentication session.

• If the client successfully completes an authentication session, the

port becomes an untagged member of this VLAN.

• If the port is statically configured as a tagged member of any other

VLAN, the port returns to tagged membership in this VLAN upon

successful client authentication. This happens even if the RADIUS

server assigns the port to another, authorized VLAN. If the port is

already configured as a tagged member of a VLAN that RADIUS

assigns as an authorized VLAN, then the port becomes an

untagged member of that VLAN for the duration of the client

connection.

Note: An authorized-client VLAN configuration can be overridden

by a RADIUS authentication that assigns a VLAN. (Refer to figure

13-1 on page 13-10.)

802.1X Per-Port Configuration Port Response

Other manuals for HP 3500yl Series

Questions and Answers:

Need help?

Do you have a question about the HP 3500yl Series and is the answer not in the manual?

General