HP 39gII - Page 250

240 Programming
Copy a program
or part of a
program
You can use the global Copy and Paste commands to
copy part or all of a program. The following steps
illustrate the process:
1. P r e s s
SPRGM to open the Program catalog.
2. Highlight the program containing the commands you
wish to copy and press .
3. Move the cursor to the beginning of the commands
you wish to copy.
4. Press .
5. Move the cursor to the end of the commands you
wish to copy. The selected commands will be
highlighted as you move the cursor.
6. When all the commands you want are highlighted,
press
SCOPY to copy the selected commands to
the clipboard.
7. Return to the Program Catalog and open the target
program.
8. Move the cursor to the line where you wish to insert
the copied commands.
9. Press
SPA ST E and the clipboard will open. Your
commands will be first in the list and highlighted
already, so just press . The commands will be
pasted into the program, beginning at the cursor
location.
Delete a
program
To delete a program:
1. P r e s s SPRGM to open the Program catalog.
2. Highlight a program to delete, then
C or .
3. Press .
Delete all
programs
You can delete all programs at once.