HP 3PAR StoreServ 7400 4-node User Manual

NOTE: Any user with Super, Service, or Edit role, or any role granted the cpg_set right, can
perform this operation. Access to all domains is required for this operation.
Table 20 CPG Modification JSON Objects
DescriptionIgnored ValuesAPI TypeJSON TypeMember
If true, disable CPG
auto grow. Default is
false.
NoneBooleandisableAutoGrow
If true, no auto grow
limit is enforced.
Default is false.
NoneBooleanrmGrowthLimit
If true, no warning
limit is enforced.
Default is false.
NoneBooleanrmWarningAlert
Specifies the name of
the CPG to be
updated to null.
Nullname31stringnewName
CPG Modification Success
Upon success, the HTTP code 200 OK is returned without a message body. The location header
of the JSON response indicates the URI of the updated CPG.
Upon successful modification of the CPG, the location portion of the response header contains the
URI for the newly modified CPG in the following format:
/api/v1/cpgs/<new name>
NOTE: The new CPG name appears if the CPG name is successfully updated. If it is not updated,
then <new name> is <cpg name>.
CPG Modification Errors
If an errror occurs, the system returns one of the error codes shown in Table 19 (page 34), or a
general error code listed in “Generic WSAPI code Member Status and Error Codes” (page 17).
Removing a CPG
To remove a CPG, use the HTTP DELETE method in the URI:
https://<storage system>:8080/api/v1/cpgs/<cpg name>
NOTE: Any user with Super or Edit role, or any role granted the cpg_remove right, can perform
this operation. Access to all domains is required for this operation.
CPG Removal Success
Upon success, the HTTP status code 200 OK is returned with no message body.
CPG Removal Errors
Possible errors following an attempt to remove a CPG are shown in Table 21 (page 36). For
generic API error codes, see Table 5 (page 17).
Removing a CPG 35

HP 3PAR StoreServ 7400 4-node Specifications

General

Brand	HP
Model	3PAR StoreServ 7400 4-node
Category	Storage
Language	English