HP 3PAR StoreServ 7400 4-node User Manual

8 Getting Storage System and Version Information
This chapter describes how to get system-wide information and version information.
Getting Storage System Information
To query for storage system information, use the HTTP GET method in the URI, with no message
body:
https://<storage system>:8080/api/v1/system
NOTE: Getting system-wide storage-system information became available with WSAPI 1.2.
Storage-system Query Success
Upon a successful query for storage-system information, the HTTP code 200 OK is returned.
Unless an internal server error occurs, the response includes a message body specified in
Table 77 (page 79).
Table 77 JSON Objects for Storage-system Query Response
DescriptionAPI TypeJSON TypeMember
System ID.uint32numberid
System name.name31stringname
System IPv4 address.name31stringIPv4Addr
System IPv6 address.print511stringIPv6Addr
System model.name31stringmodel
System serial number.name31stringserialNumber
Storage system software
version number.
name31stringsystemVersion
Total number of nodes in the
system.
uint32numbertotalNodes
Master node ID.uint32numbermasterNode
Node IDs online.Array of uint32Array of numberonlineNodes
Node IDs in clusterArray of uint32Array of numberclusterNodes
Chunklet size.uint32numberchunkletSize
Total capacity (MiB) in the
system.
uint32numbertotalCapacityMiB
Allocated capacity (MiB) in
the system.
uint32numberallocatedCapacityMiB
Free capacity (MiB) in the
system.
uint32numberfreeCapacityMiB
Failed capacity (MiB) in the
system.
uint32numberfailedCapacityMiB
Location of the system.print511stringlocation
Owner of the system.print511stringowner
Contact of the system.print511stringcontact
Getting Storage System Information 79

HP 3PAR StoreServ 7400 4-node Specifications

General

Brand	HP
Model	3PAR StoreServ 7400 4-node
Category	Storage
Language	English