HP 3PAR StoreServ 7400 4-node User Manual

Table 56 Port portLinkState Enumeration (continued)
DescriptionValueSymbol
Taking coredump.9COREDUMP
(Since WSAPI 1.2)
Link is offline.10OFFLINE
(Since WSAPI 1.2)
Firmware is dead.11FWDEAD
(Since WSAPI 1.2)
Link is idle for reset.12IDLE_FOR_RESET
(Since WSAPI 1.2)
DHCP is in progress.13DHCP_IN_PROGRESS
(Since WSAPI 1.2)
Link reset is pending.14PENDING_RESET
(Since WSAPI 1.2)
The HP 3PAR OS API server returns port connection type enumeration, as shown in Table 57 (page
64).
Table 57 Port portConnType Enumeration
DescriptionValueSymbol
FC port connected to hosts or fabric.1HOST
(Since WSAPI 1.2)
FC port connected to disks.2DISK
(Since WSAPI 1.2)
Port is not connected to hosts or disks.3FREE
(Since WSAPI 1.2)
Port is in iport mode.4IPORT
(Since WSAPI 1.2)
FC port used for Remote Copy.5RCFC
(Since WSAPI 1.2)
FC port used for data migration.6PEER
(Since WSAPI 1.2)
IP (ethernet) port used for Remote Copy.7RCIP
(Since WSAPI 1.2)
iSCSI (ethernet) port connected to hosts.8ISCSI
(Since WSAPI 1.2)
CNA port which can be FCoE or iSCSI.9CNA
(Since WSAPI 1.2)
The HP 3PAR OS API server returns port protocol enumeration as shown in Table 58 (page 65).
64 Working with Ports

HP 3PAR StoreServ 7400 4-node Specifications

General

Brand	HP
Model	3PAR StoreServ 7400 4-node
Category	Storage
Language	English