7
Removal and replacement procedures
In this section
Safety considerations......................................................................................................................7
Power down the storage enclosure .................................................................................................8
Access panel ...................................................................................................................................9
Hard drive blank...........................................................................................................................10
Hot-plug SAS or SATA hard drive ..............................................................................................10
Hot-plug power supply .................................................................................................................12
Hot-plug fan..................................................................................................................................13
I/O module....................................................................................................................................14
Midplane and backplane...............................................................................................................15
Fan board......................................................................................................................................17
Rear panel LED board ..................................................................................................................18
Power button/LED board..............................................................................................................19
Safety considerations
Before performing service procedures, review all the safety information.
Preventing electrostatic discharge
To prevent damaging the system, be aware of the precautions you need to follow
when setting up the system or handling parts. A discharge of static electricity
from a finger or other conductor may damage system boards or other static-
sensitive devices. This type of damage may reduce the life expectancy of the
device.
To prevent electrostatic damage:
• Avoid hand contact by transporting and storing products in static-safe
containers.
• Keep electrostatic-sensitive parts in their containers until they arrive at static-
free workstations.
To Next Page
Loading...
Need help?
General
