Need help?Do you have a question about the HP 50 and is the answer not in the manual?
General| Capacity | 500 GB |
|---|---|
| Interface | SATA 3.0Gb/s |
| RPM | 7200 RPM |
| Cache | 16 MB |
| Warranty | 3 years |
| Type | HDD |
| Non-Operating Temperature | -40°C to 65°C |
HP's customer self-repair program offers fast service by shipping replacement parts directly to users.
Details the various components of the storage enclosure, including part numbers and customer replaceability.
Essential safety information, including preventing electrostatic discharge.
Safety warnings for rack handling and procedure to power down the enclosure.
Procedures for removing the access panel and hard drive blanks.
Guidance on replacing hot-plug SAS/SATA drives without powering down, including backup requirements.
Procedure for removing and replacing the hot-plug power supply unit.
Steps to remove and replace the hot-plug fan unit.
Procedure for removing and replacing the I/O module, including cable disconnection.
Detailed steps for removing the midplane and backplane assembly.
Procedure for removing and replacing the fan board using a T-15 Torx screwdriver.
Instructions for removing the rear panel LED board, referencing access panel and screwdriver.
Procedure for removing and replacing the power button/LED board.
Details the IML's function, event logging, and methods for viewing recorded events.
Describes the ADU tool for collecting array controller information and detecting problems.
Identifies front panel LEDs and buttons, including the UID button/LED and their status.
Identifies rear panel components such as SAS connectors, power supplies, and system fans.
Identifies rear panel LEDs (I/O fault, power supply, fan) and their status meanings.
Diagram showing the numbering scheme for SAS and SATA drive bays.
Explains the Fault/ID and Online LEDs on SAS/SATA hard drives and their combinations.
Information about the T-15 Torx screwdriver included with the storage enclosure for service.
Details operating, shipping, and storage temperature and humidity ranges for the enclosure.
Provides physical specifications for the storage enclosure, including height and depth.
Details the weight specifications for the storage enclosure, both maximum and without drives.
To Next Page