HP 50G Quick Start Guide

Getting Started 13
Getting Started
13
38. Press ENTER to exit to the stack. You will see the variables you solved for labeled with units (see Figure 26). Let's convert the units
on Level 1. Press
@ followed by 6 (UNITS) for the Units menu.
Notice the menu items change to TOOLS, LENG, etc., as shown in Figure 27. Press the LENG menu key and length units appear on
the menu. Press
! followed by the YD menu key and notice your length on Level 1 is changed to yards (see Figure 28). Press
L to see more length units. Press L again and then ! followed by the CHAIN menu key to convert from yards to chains.
Press
L two more times to wrap around once again to your first menu page and press ! followed by the M menu key to
convert back to meters (see Figure 29).
39. The 50g supports compound units as well, such as m/s. Many units are defined by combinations of other unit types. A well known
example is the Newton, a measure of force. Press 1
@ 6 L, the FORCE menu key, followed by the N menu key. 1 newton
Figure 24 Figure 25 Figure 26
Figure 27 Figure 28 Figure 29

HP 50G Specifications

General

Digits	33 digits
Battery type	CR2032
Type	Scientific
Form factor	Pocket

Weight and Dimensions

Weight	220 g
Dimensions (WxDxH)	87 x 184 x 23.5 mm