HP 54620A - Examining and Measuring Waveform Data

Command Query Query Returns
:DISPlay:LABList #80000525 <label string>
<label string> ::= a time-ordered list of 75 labels.
Each label name is six characters followed by a
comma.
:DISPlay:LABList? #80000525<label string> <new line>
525 ::= the size in data bytes of the label string.
<label string> ::= a time-ordered list of 75 labels.
Each label name is six characters followed by a
comma.
:DISPlay:LINE <string>
<string> ::= ascii text
n/a n/a
:DISPlay:ORDer
<order list> ::= one 16-bit integer in NR1 format
for each channel on the screen. Adjacent NR1
numerals need to be separated by a comma.
:DISPlay:ORDer? <value> <new line>
<value> ::= Sixteen 16-bit integers in NR1 format
separated by commas.
:DISPlay:PIXel <x coordinate>, < y coordinate>,
<intensity>
<x coordinate> ::= 0 to 500
<y coordinate> ::= 0 to 275
<intensity> = 0 to clear pixel, 1 for half-bright,
2 for full-bright.
:DISPlay:PIXel? <x coordinate>,
<y coordinate>
<intensity> <new line>
<intensity> ::= integer in a NR1 format
0 for pixel off
1 for pixel with half-bright on
2 for pixel with full-bright on
:DISPlay:PALette <arg>
(HP 54620C only)
<arg> ::= 16-bit integer in NR1 format
:DISPlay:PALette? <arg> ::= 16-bit integer in NR1 format
This command is used by the HP 54620C.
These values match the front-panel order:
0 Default
1 Alternate 1
2 Alternate 2
3 Alternate 3
4 Inverse 1
5 Inverse 2
6 Monochrome
n/a
:DISPlay: POSition?
#800000064 <order string> <new line>
64 ::= the number of bytes in the string
<order string> ::= wave height ch. 0, bottom
pixel location ch. 0 (main screen), wave height
ch. 1, bottom pixel location ch. 1 (main screen),
... wave height ch. 15, bottom pixel location ch.
15 (main screen),
wave height ch. 0, bottom pixel location ch. 0
(delay window), wave height ch. 1, bottom pixel
location ch. 1 (delay window), ... wave height
ch. 15, bottom pixel location ch. 15 (delay
window).
:DISPlay:ROW <row number>
<row number> ::= a 16-bit integer in a NR1
format (1 - 20)
:DISPlay:ROW? <row number> <new line>
<row number> ::= a 16-bit integer in NR1 format
n/a
:DISPlay:SETup?
:DISPlay:ROW <row>; COLumn <column>;
INVerse <inverse>; GRID <grid>;SOURce
<source> :LABel <label> <newline>
<row> ::= {1,..,20}
<column> ::= {0,..,63} (HP 54620A)
<column> ::= {2,..,63} (HP 54620C)
<inverse> ::= {ON | OFF}
<grid> ::= {FRAMe | FULL | OFF}
<source> ::= {PMEMory1 | PMEMory2}
<label> ::= {ON | OFF}
:DISPlay:SOURce <value>
<value> ::= {PMEMory1 | PMEMory2}
PMEMory1 ::= pixel memory 1
PMEMory2 ::= pixel memory 2
:DISPlay:SOURce? <value> <new line>
<value> ::= {PMEMory1 | PMEMory2}
Programmer’s Quick Reference
Commands and Queries
81