HP 54620A - Commands and Queries

Commands and Queries
The following tables facilitate easy access to each command and query for
the HP 54620A/C Logic Analyzer. The commands and queries are broken into
separate categories with each entry alphabetized.
The arguments for each command list the minimum argument required. The
part of the command or query listed in uppercase letters refers to the short
form of that command or query. The long form is the combination of the
uppercase and lowercase letters.
Command Query Query Returns
n/a
:ACQuire:POINts?
<value> <new line>
<value> ::= 16-bit integer in NR1 format, either
+2048 or +8192
n/a
:ACQuire:SETup?
ACQuire:TYPE <type>;POINts <points>
<new line>
<type> ::= {NORMal | GLITch}
<points> ::={+2048 | +8192}
:ACQuire:TYPE <value>
<value> ::= {AUTO | NORMal | GLITch}
:ACQuire:TYPE? <value> <new line>
<value> ::= {AUTO | NORMal | GLITch}
:ASTore
n/a n/a
:AUToscale
n/a n/a
:BLANk <source>
<source> ::= {LCHANnel0,..,LCHANnel15 |
PMEMory1 | PMEMory2}
n/a n/a
*CLS
n/a n/a
:DIGitize
n/a n/a
:DISPLAY:COLumn <number>
<number> ::= 16-bit integer
(0 through 63 for HP 54620A)
(2 through 63 for HP 54620C)
:DISPLAY:COLumn? <value> <new line>
<value> ::= 16-bit integer in NR1 format
(0 through 63 for HP 54620A)
(2 through 63 for HP 54620C)
:DISPlay:DATA #800016256 <Binary block>
<binary block> ::= 16256 bytes of data in
IEEE-488.2 format
:DISPlay:DATA? #800016256<Binary block> <new line>
<binary block> ::= 16256 bytes of data in
IEEE-488.2 format
:DISPlay:GRID <value>
<value> ::= {ON | OFF | FRAMe | FULL}
:DISPlay:GRID? <value><new line>
<value> ::= {OFF | FRAMe | FULL}
:DISPlay:INVerse <value>
<value> ::={ON | OFF}
ON ::= inverse video display
OFF ::= normal display
:DISPlay:INVerse? <value> <new line>
<value> ::= {ON | OFF}
ON ::= inverse video display is on
OFF ::= inverse video display is off
:DISPlay:LABel <value>
<value> ::= {ON | OFF}
:DISPlay:LABel? <value> <new line>
<value> ::= {ON | OFF}
Programmer’s Quick Reference
Commands and Queries
80