HP 5500 series User Manual

3–2 www.hp.com Reference Guide
Installation
2. Push the base toward the front of the monitor until it stops.
Monitor Installation
Before installing your monitor, place it in a convenient,
well-ventilated location near your computer.
1. Turn off the power to your computer and other peripheral
devices.
2. Connect the video cable (blue connector) 1 from the back of
the monitor to the blue 15-pin connector on the back of the
computer. Tighten the cable screws to secure the cable to the
connector.
Ä
CAUTION: To avoid damaging the video cable, ensure that the
cable aligns with the 15-pin connector. Do not force the cable onto
the connector.
3. Connect the power cord 2 to the back of the monitor, then
connect the power cord to a power outlet.

HP 5500 series Specifications

General

Brightness	250 cd/m²
Aspect Ratio	16:9
Refresh Rate	60 Hz
Power Consumption	25W (typical)
Panel Type	TN
Resolution	1920 x 1080
Contrast Ratio	1000:1
Response Time	5 ms
Input Ports	VGA
Color Support	16.7 million
VESA Mount	100 x 100 mm