HP 654 A Series - Page 19

Table 1-2 b. Supplemental Characteristics for Series 657xA (continued)
_ HP 6571A [ HP 6572A HP 6573A | HP 6574A I HP 6575A
0 to -4.24V 0 to -4.25V
0 to -4.24V
0 to -fe.SlV 0 to -i- 6 . 8 JV
0 to -I-7.01V
0 to -3.97V
0 to +6.34V
-Parameter_ HP 6571A | HP 6572A | HP 6573A I HP 6574A | HP 6575A ■
Analog Programming (IP VP)
Input Signal*
VP Input:** 0 to .4.72V 0 to-4.24V 0 to-4.25V 0 to-4.24V 0 to-3.97V
-flP/-IP Differential 0 to-f7.97V 0 to-f 6 .SlV 0to-i-6.8JV 0 to-I-7.01V 0to-f-6 34V
Input:
Input Impedance
VP Input: 60 kfl
■ 52 kn
*Signal source must be isolated. **Referenced to output signal common. _
Current Monitor (IM)
Output Signal*: -0.25 to -fS.OSV j -0.26 to -t-7.7V | -0.25 to -f7.7V [ -0.25 to -f7.93V j -0.25 to ■ t-7.15V
Output Impedance: 490 q
*CoiTesponds to 0% to 100 % output current._
Savable States
Nonvolatile memory
locations:
Nonvolatile memory write
cycles:
5
5(0 through 4)
40,000, typiceil
Recommended Calibration
Interval:
1 year
Safety Compliance
Complies with:
CSA 22.2 No.231 & lEC 348
Designed to comply with:
UL 1244 VDE 0411
RFI Suppression (complies
FTZ 1046/84, Level B
with):
Dimensions
Width:
425.5 mm (16.75 in)
Height:
132.6 mm (5.22 in)
Depth (w/safety cover):
640 mm (25.2 in) I
Weight
Net:
27.7 kg (61 lb)
Shipping:
31.4 kg (69 lb)
Characteristics
Series 657xA
General Information 1-13