HP 6890 series

9
 
Lit offset   "  !    ! 
     !        
!          $

   !       !    
  Lit offset     
    Lit offset       
!     #    #  # ! 
   
       !      
  !
     #   !    
Procedure: Changing the Lit offset setpoint
Lit offset
ąCONFIGURE FRONT DET
Mkup gas type N2
Lit offset 2.0 <
Electrometer On
1. Press [Config][Front Det] or [Config][Back Det].
2. Scroll to
Lit offset and enter a number.
The default is 2.0 pA.
Enter 0 to disable the automatic reignite function.
The setpoint range is 0 to 99.9 pA.