HP 7 Pro Series - Function test

19
2) Lift the USB-A connector from the PCB.
3) Place the new component on the PCB. Be sure that it matches the PCB footprint.
4) Solder the new component.
Function test
After repair, be sure to confirm that all functions are working.
Table 4-1: Function test
Test item
Operating description
Tool used
HDMI test
Confirm whether image displays and sound plays
correctly on the monitor
Computer or DVD player
DP1/DP2 test
Confirm whether image displays and sound plays
correctly on the monitor
Computer or DVD player
USB-C test
Confirm the PC whether can identify the USB 3.0
Computer or Notebook
USB-A test
Confirm Charging/USB device working normally.
Computer or Notebook