HP 8100 - Page 41

Chapter 1 HP Digital Copy 41
HP Digital Copy Installation
Note The green LED lights up on the S
TART
button to show that the
HP Digital Copy is ready to copy (see page 56
). If there is a problem
getting to the READY TO COPY state with the HP Digital Copy, see page 42
or call your service provider.
4 Load the original document face down into the automatic document feeder
or place it on the flatbed of the HP Digital Copy (see pages 61
and 63), and
select the desired number of copies. A green LED lights up on the
automatic document feeder cover to show that you have properly inserted
the documents into the feeder.
5 Press the S
TART
button on the display panel to start copying.
Note The original document will come out in the HP Digital Copy output bin
when using the automatic document feeder or will remain on the flatbed
of the HP Digital Copy. Output copies will be printed on the printer and
will be located in the printer output bin.