Chapter 1 HP Digital Copy 78
Foreign Interface Harness (FIH) (8150 MFP only)
Foreign Interface Harness (FIH)
(8150 MFP only)
This feature allows you to use a job accounting device to monitor the number
of copies sent through the HP Digital Copy. This feature is only available for
the HP LaserJet 8150 printer.
Note The number of printed pages from the printer are not counted using the
Foreign Interface Harness (FIH). Only the number of copied pages from
the HP Digital Copy are counted.
To enable this feature, you must first contact the specific job accounting device
vendor to obtain the job accounting hardware controller (if necessary) and
cable. Once the hardware controller and cable are present, perform the
following steps:
1 Plug the Foreign Interface Harness cable into the printer connection
labeled AUX. (The printer can be on or off.)
Continued on next page.
To Next Page
Loading...
