Chapter 1 HP Digital Copy 57
HP Digital Copy Control Panel
Name of the
button and LED Function
Button 0-9 Use to enter the number of copies you desire.
May also be used periodically to enter a
numerical value.
RESET Resets all of the copier settings to the default
values.
START Begins a copy job or continues a copy job that
has been interrupted because of an error.
STOP Stops a copy job.
C Clears the number of copies setting. (Does not
clear the other copy module settings.)
LED Paper Sensor
LED
Illuminates when paper is aligned correctly in the
automatic document feeder.
Start Button
LED
See Start Button LED
on page 58 for a detailed
description of this LED.
To Next Page
Loading...
