HP 8562E - Page 33

Table l-4. Recommended Test Equipment
Critical Specifications
for Equipment Substitution
Frequency range:
10 MHz to 13.2 GHz
Frequency accuracy (CW): x l0-g/day
Leveling modes: Internal & External
Modulation modes: AM & Pulse
Power level range: -80 to +16 dBm
Frequency range: 200 Hz to 80 MHz
Frequency accuracy: 1 x 10e7/month
Flatness: f0.15 dB
Attenuator accuracy: <f0.09 dB
External 10 MHz reference input
Frequency resolution: 1 Hz
Frequency range: 100 kHz to 2.5 GHz
Residual SSB phase noise at 1 GHz:
<-73 dBc/Hz at 10 Hz offset
<-lo7 dBc/Hz at 1 kHz offset
<-124 dBc/Hz at 10 kHz offset
<-124 dBc/Hz at 100 kHz offset
Frequency range: 10 kHz to 50 MHz
Pulse width: 200 ns
3utput amplitude: 5 V peak-to-peak
Functions: pulse & triangle
Pulse rise time: <lOO ns
I’TL sync output
Frequency range: 1 MHz to 200 MHz
Frequency modulation mode
Modulation oscillator frequency: 1 kHz
FM peak deviation: 5 kHz
Instrument
sources
jynthesized sweeper
(two required)
;ynthesizer/level generator
iynthesized signal generator
‘&e/function generator
LM/FM signal generator
Part of microwave workstation
Xecommendec
Model
HP 8340A/B*
HP 83630A
opt 001, 008
HP 3335A+
HP 8663A
HP 8116A
HP 8640B
HP 8642A
Use
PAT,
WV
PAT,
WV
p,v
P,A
A
’ = performance tests; A = adjustments; M = test & adjustment module; T = troubleshooting;
J = operation verification
l-10 General Information