What does blinking power LED mean on HP 9000 rp3410 Server?
When the HP Server is off and power is connected, a blinking Power LED at a 1 Hz rate indicates that standby power is available to the server circuits, but main power is off.
What to do if HP Server power button functions when the server is off?
When the HP Server is off, system power turns on when the power button is held for one to three seconds.
What to do if HP 9000 rp3410 power button functions when the server is on with the operating system running?
When the HP Server is on with the operating system running, system power turns off (software controlled power off) when the button is held for one to three seconds. If you hold the button for five seconds or longer, system power turns off immediately (hard power off).
What to do if HP 9000 rp3410 Server power button functions when the server is on and at BCH?
When the HP Server is on and at BCH, system power turns off immediately (hard power off) when the button is held for one to three seconds. Also, system power turns off immediately (hard power off) when the button is held for five seconds or longer.
What to do if HP Server power button is not responsive when server is off?
When the HP Server is off and power is not connected to power supplies, pressing the power button has no effect.
General| Model | HP 9000 rp3410 |
|---|---|
| Category | Server |
| Number of Processors | 1 or 2 |
| Processor Speed | 1.0 GHz or 1.1 GHz |
| Memory | up to 32 GB |
| Operating System | HP-UX |
| Storage | Up to 4 hot-plug SCSI drives |
| Network Interface | Ethernet |
| Form Factor | Rack-mounted |
| Power Supply | Redundant power supply options |
| Processor | PA-8900 |
To Next Page
