EasyManua.ls Logo

HP 9000 rp3410 - User Manual

HP 9000 rp3410
254 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User Service Guide
HP 9000 rp3410 and HP 9000 rp3440
Manufacturing Part Number: A7137-96008
Fourth Edition
April 2007
© Copyright 2007 Hewlett-Packard Development Company, L.P.

Table of Contents

Other manuals for HP 9000 rp3410

Questions and Answers

  • J
    John McintyreAug 2, 2025
    What does blinking power LED mean on HP 9000 rp3410 Server?
    • K
      Kelly JacksonAug 2, 2025
      When the HP Server is off and power is connected, a blinking Power LED at a 1 Hz rate indicates that standby power is available to the server circuits, but main power is off.
  • C
    cynthia55Aug 7, 2025
    What to do if HP Server power button functions when the server is off?
    • J
      Jesus McintoshAug 7, 2025
      When the HP Server is off, system power turns on when the power button is held for one to three seconds.
  • R
    Ronald AlvarezAug 14, 2025
    What to do if HP 9000 rp3410 power button functions when the server is on with the operating system running?
    • T
      Thomas PageAug 14, 2025
      When the HP Server is on with the operating system running, system power turns off (software controlled power off) when the button is held for one to three seconds. If you hold the button for five seconds or longer, system power turns off immediately (hard power off).
  • J
    Jeffrey HebertAug 20, 2025
    What to do if HP 9000 rp3410 Server power button functions when the server is on and at BCH?
    • R
      Richard HowellAug 20, 2025
      When the HP Server is on and at BCH, system power turns off immediately (hard power off) when the button is held for one to three seconds. Also, system power turns off immediately (hard power off) when the button is held for five seconds or longer.
  • M
    Michelle JacksonAug 25, 2025
    What to do if HP Server power button is not responsive when server is off?
    • M
      Megan Humphrey MDAug 26, 2025
      When the HP Server is off and power is not connected to power supplies, pressing the power button has no effect.

Summary

Chapter 2 System Specifications

Chapter 3 Installing the System

Console Setup

Describes how to set up and start a console session on the server.

Chapter 5 Troubleshooting

Troubleshooting Methodology

Provides basic server troubleshooting information to diagnose common issues.

Troubleshooting System Power

Provides information and procedures for troubleshooting system power issues.

Chapter 6 Removing and Replacing Components

Safety Information

Provides procedures for safe handling of components to prevent injury and damage.

Removing and Replacing System Memory

Provides instructions for installing DDR SDRAM memory modules.

Removing and Replacing the System Board

Details how to remove and replace the system board, including data transfer.

Appendix B Utilities

HP 9000 rp3410 Specifications

General IconGeneral
ModelHP 9000 rp3410
CategoryServer
Number of Processors1 or 2
Processor Speed1.0 GHz or 1.1 GHz
Memoryup to 32 GB
Operating SystemHP-UX
StorageUp to 4 hot-plug SCSI drives
Network InterfaceEthernet
Form FactorRack-mounted
Power SupplyRedundant power supply options
ProcessorPA-8900

Related product manuals