HP 9000 rp3410 - Figure 3-39 Locking the Dual Processor Module in Place; Figure 3-40 Slide the Sequencing Retainer Plate

Installing the System
Installing Additional Components
Chapter 3
96
Figure 3-39 Locking the Dual Processor Module in Place
Step 9. Slide the sequencing retainer plate toward the front of the server.
Figure 3-40 Slide the Sequencing Retainer Plate
Step 10. Screw in the four heatsink captive screws in a criss-cross torquing pattern by alternately
tightening the screws so as not to completely tighten one screw before the others.
CPU Install Tool
(2.5 mm Driver or Allen
Wrench)