HP 9000 rp3410 - Figure 6-56 Installing a PCI Slot Cover; Figure 6-57 Installing a PCI Card; Replacing a PCI or Graphics Card

Chapter 6
Removing and Replacing Components
Removing and Replacing PCI Cards
204
Step 5. Install a PCI slot cover to close the cavity left by the removal of the PCI card (Figure 6-56). This will
maintain the proper airflow within the chassis.
Figure 6-56 Installing a PCI Slot Cover
Replacing a PCI or Graphics Card
Step 1. Remove the PCI card cage. (See “Removing the PCI Card Cage” on page 200.)
Step 2. Grasp the edges of the PCI card to be installed and gently press the card into the PCI backplane
connector.
Figure 6-57 Installing a PCI Card