Chapter 5
Troubleshooting
Cleaning Procedures
145
Table 5-6 lists the system board LEDs.
Cleaning Procedures
This section provides information on how to clean the HP 9000 rp3410 and rp3440 servers.
IMPORTANT Power off the server when cleaning it.
Table 5-7 provides instructions on how to clean the server.
CAUTION DO NOT use petroleum-based cleaners (such as lighter fluid) or cleaners containing benzene,
trichlorethylene, ammonia, dilute ammonia, or acetone. These chemicals could damage all
plastic and painted surfaces.
Table 5-6 System Board LEDs
LED Description
STBY This standby LED comes on as soon as the system’s power cord is plugged in. If this
light is off when you plug it in, reseat the power supply, and if this does not work,
replace the power supply.
BMC A few seconds after the system is plugged in this LED starts blinking, which means
that the BMC is active.
Table 5-7 Cleaning
Component Time Frame Cleaning Procedure
Keyboard Regularly Dust with damp, lint-free cloth.
Monitor screen Regularly Use the HP Video Screen Cleaning Solution found in 92193M
Master Clean Kit.
Mouse Regularly See the mouse's manual for mouse maintenance procedures.
Cooling fans and grills Six Months Check functions of cooling fans and clean the intake openings
on the chassis of dust, lint, and other obstructions to airflow.
To Next Page
Loading...
