Chapter 6
Removing and Replacing Components
Removing and Replacing Airflow Guides
171
You must remove the processor airflow guide:
• If it is damaged to the point that airflow across the dual processor modules is restricted.
• To access components under the airflow guide.
• The memory airflow guide ensures that the proper volume of air flows over the memory DIMMs to cool
them.
You must remove the memory airflow guide:
• If it is damaged to the point that airflow across the memory DIMMs is restricted.
• To access memory DIMMs and sockets.
NOTE Air flows through the server from front to back.
Figure 6-27 Airflow Guides Locations
Removing and Replacing the Memory Airflow Guide
Removing the Memory Airflow Guide
Step 1. Power off the server and disconnect external cables.
Step 2. Remove the top cover. (See “Removing and Replacing Server Covers and Bezel” on page 151.)
Processor Airflow Guide
Memory Airflow Guide
Front Portion of Processor
Airflow Guide
To Next Page
Loading...
