HP 9000 rp3410 - Verifying the Server Configuration Using Boot Console Handler

Chapter 4
Booting the Operating System
Verifying the Server Configuration Using Boot Console Handler
134
Verifying the Server Configuration Using Boot Console Handler
From the BCH Main Menu, enter in to go the INformation Menu. Use the corresponding command from the
menu to verify the type and quantity of processors, memory, and I/O cards:
Step 1. To enter the POSSE shell, type CO from the
iLO MP Main Menu. To list all the categories available in
the shell, type help .
• pr (Processors)
• me (Memory)
• io (Check the PCI device information to determine if the values match the devices installed in
the server)
Step 2. Verify the parameters.
Step 3. To return to the BCH
Main Menu, use the ma command .