HP 9000 rp3410 - Figure 6-4 Removing the Top Cover on a Rack-Mounted Server

Chapter 6
Removing and Replacing Components
Removing and Replacing Server Covers and Bezel
153
Step 2. Ensure the top cover lock keyswitch is in the unlocked position. Rotate the blue release lever
toward the back of the server and slide the cover toward the back of the server.
Figure 6-4 Removing the Top Cover on a Rack-Mounted Server
Step 3. Lift the top cover off the server chassis.
Replacing the Top Cover on a Rack-Mounted Server
CAUTION Secure any wires or cables in your server so they will not get cut or interfere with the
replacement of the top cover.