Installing the System
Installing Additional Components
Chapter 3
71
Figure 3-15 Replacing the Side Cover on a Pedestal-Mounted Server
Step 2. Close the cover until it snaps onto the server chassis.
Removing and Replacing Front Bezel on a Pedestal-Mounted Server
You must remove the front bezel from the chassis to gain access to the power supplies and optical drive.
Removing the Front Bezel on a Pedestal-Mounted Server
To remove the front bezel parts, follow these steps:
Step 1. Use the indentation at the top edge of the bezel to pull the bezel away from the chassis and to a 45
degree angle.
To Next Page
Loading...
