HP 9000 rp3410 - Table B-1. BCH Main Menu, Submenus, and Commands; Table B-2 Boot Paths

Appendix B
Utilities
Boot Console Handler
242
Table B-1 shows the
BCH Main Menu, submenus and commands. Examples are provided in “BCH Main Menu
Commands and Submenus” on page 242.
The boot device paths specify the primary boot device (PRI boot path), the high-availability alternate device
(HAA boot path), and the alternate device (ALT boot path).
Table B-2 lists the boot paths.
BCH Main Menu Commands and Submenus
The following sections provide information and examples of the submenus and commands in the BCH
firmware user interface.
The BCH
Main Menu is the first menu displayed when you enter the firmware user interface. The other menus
available are listed in this menu. Enter DI (display) to view the commands available from this menu.
Access other menus by entering the name of the menu at the command prompt. From a given menu, you can
run a command from any other menu by entering the menu name that is associated with the command,
followed by the command. For example, to run the TI (time) command (in the
COnfiguration menu) from the
Main Menu, enter co ti. To see all available commands listed under their respective menus, enter HE (help) MA
(main).
Table B-1 BCH Main Menu, Submenus, and Commands
Submenu Description
BOot [PRI|ALT|<path>] Boots from the specified path.
PAth [PRI|ALT] [<path>] Displays or modify a path.
SEArch [DIsplay|IPL] [<path>] Search for boot devices.
COnfiguration menu Displays or sets boot values.
INformation menu Displays hardware information.
SERvice menu Displays service commands.
DIsplay Redisplays the current menu.
HElp [<menu>|<command> Displays help for menu or command.
RESET Restarts the system.
Table B-2 Boot Paths
Boot Source Boot Path
Bottom Disk – Slot 1 (SCSI ID = 0) 0/1/1/0.0.0 (Simplex Mode)
0/1/1/1.0.0 (Duplex Mode)
Top Disk – Slot 2 (SCSI ID = 1) 0/1/1/0.1.0 (Duplex Mode)
DVD 0/0/3/0.0