HP 9000 rp3410 - Figure 6-12. Replacing the Top Cover on a Pedestal-Mounted Server; Figure 6-13. Replacing the Side Cover on a Pedestal-Mounted Server

Chapter 6
Removing and Replacing Components
Removing and Replacing Server Covers and Bezel
159
b. Place the top cover on the chassis and slide it toward the front of the server until the blue
release lever snaps in place.
Figure 6-12 Replacing the Top Cover on a Pedestal-Mounted Server
Step 5. Replace the side cover:
a. Align the side cover’s mounting holes with the matching tabs on the server chassis.
b. Close the side cover until it snaps onto the server chassis.
Figure 6-13 Replacing the Side Cover on a Pedestal-Mounted Server