Chapter 1
Overview
Detailed Server Description
22
Detailed Server Description
This section provides information on the features that comprise the HP 9000 rp3410 and rp3440 servers.
Processor
The following is supported on the HP 9000 rp3410 and rp3440 servers:
• 800 MHz/1.5 GB cache (HP 9000 rp3410 and rp3440 servers).
• 1 GHz/1.5 GB cache (HP 9000 rp3440 server only).
• Both processors are available with 32 MB or 64 MB L2 cache.
• HP 9000 rp3410 servers can be 1P/1C and 1P/2C.
• HP 9000 rp3440 servers can be 1P/1C and 1P/2C, and 2P/2C.
Memory
The following is supported on the HP 9000 rp3410 and rp3440 servers:
• 12 memory DIMM slots.
• Minimum memory size is as follows:
— 512 MB (2 x 256 MB DIMMs in a HP 9000 rp3410, model A7136A server).
— 1 GB (4 x 256 MB DIMMs in a HP9000 rp3410 model A7136B server, or in a HP 9000 rp3440 server).
• Maximum memory size is as follows:
— 6 GB (HP 9000 rp3410 server), 24 GB (HP 9000 rp3440 server with 2 GB DIMMs installed in all 12
slots). or
— 32 GB (HP 9000 rp3440 server with 4 GB DIMMs installed in the first eight slots)
• For the HP 9000 rp3410 server, DIMMs are as follows:
— 256 MB, 512 MB, and 1 GB
— standard 184 pins 2.5V
— DDR266, CL2, registered, ECC
• For the HP 9000 rp3440 server, DIMMs are as follows:
— 256 MB, 512 MB, and 1 GB, 2 GB, 4 GB
— standard 184 pins 2.5V
— DDR266, CL2, registered, ECC
• Only one supported configuration for 4 GB DIMMs; 2 quads (8 DIMMs); and no other DIMMs can be
installed.
• DIMMs loaded by quads enable interleaved mode and chip spare.
• Memory is loaded across both memory busses (two DIMMs on each bus) to ensure maximum bandwidth
and performance.
• 133 MHz memory bus frequency, 266 MTransfers/s data, 8.5 GB/s peak data bandwidth.
To Next Page
Loading...
