HP 9000 rp3410 - Figure 6-41 Unlocking the Dual Processor Module Locking Mechanism

Chapter 6
Removing and Replacing Components
Removing and Replacing a Dual Processor Module
188
Step 12. Unlock the dual processor module locking mechanism using the CPU install tool. Insert the tool
into the hole that runs down through the edge of the turbo fan heatsink and rotate the special
processor tool 180 degrees counterclockwise.
Figure 6-41 Unlocking the Dual Processor Module Locking Mechanism
CPU Install Tool
(2.5 mm Driver or
Allen Wrench)