HP 9000 rp3410 - Figure 6-28 Removing the Memory Airflow Guide; Removing and Replacing the Processor Airflow Guide

Chapter 6
Removing and Replacing Components
Removing and Replacing Airflow Guides
172
Step 3. Grasp the memory airflow guide and lift it out of the server.
Figure 6-28 Removing the Memory Airflow Guide
Replacing the Memory Airflow Guide
Step 1. Align the guides on both sides of the airflow guide with the slots on the chassis.
Step 2. Insert the memory airflow guide in the slots.
Step 3. Replace the cover.
Step 4. Reconnect power and external cables.
Removing and Replacing the Processor Airflow Guide
Removing the Processor Airflow Guide
Step 1. Power off the server and disconnect power and external cables.
Step 2. Remove the server cover.
Step 3. Remove the IDE cable and power module cables from the processor airflow guide cable clips.
Step 4. Remove the main portion of the airflow guide:
a. Hold the guide using the opening on top of the guide.