HP 9000 rp3410 - Information Menu

Appendix B
Utilities
Boot Console Handler
245
The configuration default command sets the following values:
Primary boot path: 0/0/1/0.0
Alternate boot path: 0/0/2/0
Console path: 0/0/1/0.0
Keyboard path: 0/0/4/0.0
Autoboot: ON
Autosearch: ON
Autostart: OFF
BootTimer 0
Information Menu
The
INformation menu commands enable you to view information about the configuration and state of the
system.
Main Menu: Enter command or menu > in
---- Information Menu --------------------------------------------------------
Command Description
------- -----------
ALL Display all system information
BootINfo Display boot-related information
CAche Display cache information
ChipRevisions Display revisions of major VLSI
COprocessor Display coprocessor information
FwrVersion Display firmware version
* IO Display I/O interface information
LanAddress Display Core LAN station address
MEmory Display memory information
** PRocessor Display processor information
*** WArnings Display selftest warning messages
*** IORevisions Display selftest warning messages
BOot [PRI|ALT|<path>] Boot from specified path
DIsplay Redisplay the current menu
HElp [<command>] Display help for specified command
RESET Restart the system
MAin Return to Main Menu
----
Information Menu: Enter command >
* The PCI device information displayed includes description, path, vendor ID, device ID, slot number, and bus
number.
** The PRocessor command displays the system model string.
***Warnings displayed are as follows:
• WARNING: Too many CPUS for a rp3410 system. System will not boot.
• WARNING: A fatal error has occurred-system cannot boot. Review warning messages in the information
menu.