HP 95LX - Customizing 1-2-3

Customizing 1-2-3
Because of its independent origins outside of the Palmtop the 1-2-3 application has
a wide range of default settings that you can manipulate to suit your needs. The
settings explained below are those that will apply to each new spreadsheet you
create unless you specifically choose to alter them in a particular circumstance. So
try to choose settings that will apply to most of your new spreadsheets. Press (123).
Setting the Column-Width Default
Set the width of all columns in the spreadsheet except those you individually set:
1. Press (123), (MENU), Wlorksheet, (Global, (Clolumn-Width.
2. Type anumber from 1 to 248 (the character width you want for each column),
and press (ENTER).
Setting the Label Prefix Default
Set the label alignment for all future entries (it doesn’t affect current entries)
except those that you have individual aligned differently.
1. Press (123), (MENU), (Wlorksheet, (Global, (L)abel-Prefix.
2. Select one of three options: (Left Labels aligned to left edges of cells.
(Right Labels aligned to right edges of cells.
(Clenter Labels centered in cells.
Setting the Protection Default
When global protection is enabled, you can make no changes to cells, except those
that have been specifically unprotected (with (MENU), (Rlange, (Unprot).
1. Press (123), (MENU), (Wlorksheet, (Global, (P)rotection.
2. Press either (E) to enable or (D) to disable the global protection.
Customizing 1-2-3 107