HP 95LX - MS-DOS Command Set

MS-DOS Command Set
From the MS-DOS prompt:
BREAK [ONIOFF)
CD [42] [path]
CHIDSK [d*] [path] filename [#F) [7%]
Allows fixing of errors found
/’ it : Displays all file and subdirectories on disk
CLS
COMMAND [device] [#P] [~E 2 nnnnn] [#C command)
Prevents EXIT from returning you to System Manager
ZE: Sets the size of the environment to nanan (from 160 to 32768)
ZC: Causes new command processor to execute command and then return to old
command processor
COPY [~RI[~BI [d1 *] [pathI1sourcefile [A] [ZB] [d2 2] [path2] [targetfile] [A] [7B]
ZA: Copies sourcefile as ASCII text, up to the end-of-file marker; appends an end-
of-file marker to targetfile
/B: Copies sourcefile as Binary, including any end-of-file markers; appends nothing
to targetfile
ZY: Verifies the copy of the file
CTTY device
DATE (mm-dd-yy]
DEL [42] [path] filename
DIR (4: ] [path] [filename] [/P1 [WI]
Shows directory one page at a time
s oN : Lists only file names and subdirectories, three names to a line
DISPCTL {+Ci-C1[+KI-KI12>
+C: Enables cursor tracking while under MS-DOS control
—C: Disables cursor tracking while under MS-DOS control
+K: Enables (ALT}-arrow key movement while under MS-DOS control
=K: Disables(ALT}-arrow key movement while under MS-DOS control
ERASE (a: [path] filename
EXIT
FORMAT, 43 [V1 [#P1 [Riss] [/E] [VQ]
Prompts you for a volume label
/P: Formats a plug-in card as a “pseudo-floppy” (without PCMCIA information).
Can't affect drive C2.
/R: Formatsaplug-in card with ss sectors allocated for the root directory (at 16 files
per sector). Default is 4.
7E: Setsall data sectors to zero during formatting. Does not allow for any possible
data recovery after formatting.
ZR: Suppresses all prompts and outputs during formatting
MD (4:1 [path] directoryname
PASSWORD [A] [~M] [D1
ZA: Makes password active every time machine is turned on.
#M: Makes password active only when machine is turned off using (ALT)-{OFF)
PATH [(d1 2] pathi[§[d2%] path2 ... 1]