HP 95LX - Customizing the Appointment Book

Customizing the Appointment Book
Adjusting the Daily View
* You may choose to see just the appointments you've scheduled, without any of
the “empty” hours. Just press (MENU), (Slettings, (Timeline, (Alppts-Only.
* You may choose which hour should be the first one shown at the top of the daily
screen each time the Appointment Book is opened. Press (MENU), (Slettings,
(Flirst-Hour, then type the time you want to begin your day and press (ENTER).
* You may make the time interval shown in the daily view either 60 minutes (the
normal default), 30 or 15 minutes. Just press (MENU), (Settings, (Timeline, and
then select the desired interval.
Turning the Sound of Alarms On/Off
* Press (Skttings, (Alarm, (E}nable to turn on the alarm sounds.
* Press (MENU), (Settings, (Alarm, (D)isable to turn off all alarm sounds. Note that
the alarm message will still flash on the screen, but no sound will occur.
Changing the Default Leadtime between Alarm and Appointment
1. Press (MENU), (Skttings, (LJeadtime.
2. Type in a leadtime between 0 to 30 minutes and press (ENTER). Changing the
default doesn’t affect the alarms already set in your Appointment Book.
Enabling/Disabling Carry-Forward
1. Press (MENU), (Skttings, (Clarry-Forward, (Enable to cause each future To-Do
task to be carried forward until checked off or deleted—unless you specifically
change this when you enter a particular task.
2. Press (MENU), (Skttings, (Clarry-Forward, (Disable to prevent unaccomplished
To-Do tasks from being carried forward to the next day—unless you specify
that you want a particular task carried forward when you enter it.
112 5. Oprmmazing Your WORK