HP 95LX - Page 89

Moving Values from the Calculator into 1-2-3
You can move information from the Calclineinto a cell in 1-2-3. There are two ways
to do this, depending upon how you want the information interpreted.
To move a number from the calcline to 1-2-3 as a label, use the Clipboard:
1. With the Calcline showing, press (COE)
2. Open the 1-2-3 worksheet and move the cursor to the desired cell.
3. Press EEE).
To move a number from the calcline to 1-2-3 as a value:
1. Make sure the 1-2-3 worksheet is open.
2. Open the Calculator and, with the Calcline showing, press (S10), @). The open
worksheet is displayed.
3. Move the cursor to the desired cell and press (ENTER).
Importing Data into the STAT Built-In Worksheet
You can import data into the _STAT template just as you can into any other 1-
2-3 spreadsheet. You will want to import a delimited file (see page 84) that puts
a comma between each pair of numbers (i.e. field)—if using two variables— and
a carriage return between each “row” of data (i.e. record). Thus, the data in the
example on page 67 might have been imported into STAT from the following text
file :
2608 , 228004
2080 ,21500
2780 ,248004
15808 ,145004
etc.
Importing Data into a 1-2-3 Spreadsheet 89